H-LUOKAN SIIRTOKATTOKETJUT (H78A / H78B / H130 / H131 / H138)

Vastuun kieltäminen

All the contents of this page are from the network, and the content is only as a reference for product selection. Our products are replacement parts rather than original spare parts. We are not the holder of the original trademark of the content. Our products are only suitable for after-sales replacement parts rather than original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

"H"-luokan siirtokattoketjut

EVER-POWER offers two types of transfer – “H” Class Transfer Chain and Combination Transfer Chain. This product description will cover the “H” Class Transfer Chain, which includes chains numbered H78A, H78B, H130, H131, and H138. All “H” Class Transfer Chain is available only in riveted building.

Types of “H” Class Transfer Chain

“H” Class Transfer Chain numbered H78A, H130, and H131 is manufactured with peaked roofs. Chain numbered H138 and H78B has flat roofs. Both types of EVER-POWER Transfer Chain, described sometimes as “roof top” and “camelback” chain, are designed to carry heavily concentrated loads such as lumber, boxes, barrels, and crates. They are usually intended for operation in troughs in several parallel strands with only the tops of the links protruding.

tekniset tiedot

All “H” Class Transfer Chain is available in Promal (Duramal). The tensile strengths of HZPT Transfer Chain range between 11,700 to 30,000 pounds. Rivet pins furnished with “H” Class Transfer Chain are T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. “EVER-POWER” Transfer Chain is available in a pitch selection of 1.631 to 4.000 inches. Every “EVER-POWER” Transfer Chain is produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

Yleiset käyttöskenaariot

“H” Class Transfer Rooftop Chains are commonly used in industries such as lumber, packaging, and manufacturing. They are designed to carry heavily concentrated loads and are suitable for operation in troughs in several parallel strands with only the tops of the links protruding. These chains are ideal for use in situations where space is limited and heavy loads need to be transported.

Hyödyt

  • Designed to carry heavily concentrated loads
  • Suitable for operation in troughs in several parallel strands with only the tops of the links protruding
  • Ideal for use in situations where space is limited and heavy loads need to be transported

Materiaalit ja asennus

“H” Class Transfer Rooftop Chains are available in Promal (Duramal) and are installed using T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. These chains are designed for use in troughs in several parallel strands with only the tops of the links protruding.

Ylläpito ja korjaus

Regular maintenance is necessary to keep “H” Class Transfer Rooftop Chains running smoothly. Chains should be inspected regularly for wear and elongation of pitch. If any damage or wear is detected, chains should be repaired or replaced immediately to prevent further damage.

Korvaaminen

If “H” Class Transfer Rooftop Chains need to be replaced, it is important to select a replacement chain that is compatible with the existing chain. EVER-POWER Transfer Chains are produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

EVER-POWER's Product Business

EVER-POWER GROUP is committed to providing high quality products at a favorable price, along with considerate service. We welcome customers to visit us and can customize chains based on pictures or samples provided.

FAQ

1. What is the tensile strength of “H” Class Transfer Rooftop Chains?

The tensile strengths of HZPT Transfer Chain range between 11,700 to 30,000 pounds.

2. What are “H” Class Transfer Rooftop Chains used for?

“H” Class Transfer Rooftop Chains are commonly used in industries such as lumber, packaging, and manufacturing. They are designed to carry heavily concentrated loads and are suitable for operation in troughs in several parallel strands with only the tops of the links protruding.

3. How are “H” Class Transfer Rooftop Chains installed?

“H” Class Transfer Rooftop Chains are installed using T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. These chains are designed for use in troughs in several parallel strands with only the tops of the links protruding.

4. How often should “H” Class Transfer Rooftop Chains be inspected?

Regular maintenance is necessary to keep “H” Class Transfer Rooftop Chains running smoothly. Chains should be inspected regularly for wear and elongation of pitch.

5. Can EVER-POWER Transfer Chains be interchanged with chain of other manufacturers?

Yes, EVER-POWER Transfer Chains are produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

Ota yhteyttä saadaksesi lisätietoja → https://www.ever-power.net/contact-us/

Voit aina kysyä lisätietoja! Ota rohkeasti yhteyttä!

SAATAVAT MATERIAALIT

1. Ruostumaton teräs: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Messinki: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Pronssi: C51000, C52100, C54400 jne
5. Rauta: 1213, 12L14,1215
6. Alumiini: Al6061, Al6063
7.OEM pyyntösi mukaan

PINTAKÄSITTELY

Hehkutus, luonnollinen kanonisointi, lämpökäsittely, kiillotus, nikkelöinti, kromaus, sinkitys, keltainen passivisaatio, kulta-passivisaatio, satiini, musta pinta maalattu jne.

KÄSITTELYMENETELMÄ

CNC-työstö, lävistys, sorvaus, jyrsintä, poraus, hionta, avaus, hitsaus ja kokoonpano

Laadunvalvonta ja todistus

Teknikot tarkastavat tuotannon itse, lopputarkastavat ammattimaisen laatutarkastajan ennen pakkausta

ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

PAKETTI JA LÄHIAIKA

Koko: Piirustukset

Puukotelo / kontti ja lava tai räätälöityjen eritelmien mukaisesti.

15-25 päivän näytteet. 30-45 päivän offcial-järjestys

Aiheeseen liittyvät haut: